 |
|
|
| |
|
|
|
|
|
| |
| High quality timbers produced from beech, oak, pine, sapelli, spruce and fir trees are dried at the rate of 8-12% and manufactured into edge glued parts of standard thickness. Edge glued panels are manufactured from wood pieces those are eliminated from all irregularities by automatic knot cutting machine and bonded using finger-joint technology then packaged for sale. Using D4 norm bonding resin, our edge glued panels are 100% natural and environment friendly. Continuously tested for high quality by our specialists in our laboratories, edge glued panels are manufactured according to European standards. |
|
|
| Manufacture of our solid edge glued panel range is done in following thickness, size and specifications. |
|
| Length (cm) |
: |
200, 300, 350 ,400 |
| Width (mm) |
: |
130 |
| Thickness (mm) |
: |
16, 19, 26, 30, 42 |
| Resin Used |
: |
Environment Friendly D4 8 (water resistant in outdoors) |
| Humidity |
: |
%8 - %12 |
| Sanding |
: |
Both surfaces 100 sanding |
| Manufactured from Spruce and Fir trees. |
|
|
| Manufacture of our finger jointed edge glued panel range is done in following thickness, size and specifications. |
|
| Size (cm) |
: |
100 x 410 - 130 x 410 |
| Thickness (cm) |
: |
10, 16, 19, 26, 30, 42 |
| Lamination Width (mm) |
: |
42 - 55 |
| Resin Used |
: |
Environment Friendly D4 8 (water resistant in outdoors) |
| Humidity: |
: |
%8 - %12 |
| Sanding |
: |
Both surfaces 100 sanding |
| Manufactured from Beech, Oak, Sapelli, Pine, Spruce and Fir trees. |
|
|
|
|
|
